Sensata Crydom DRC Series Solid State Relay, DIN Rail Mount
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
Sensata / CrydomMounting Type
DIN Rail Mount
Control Voltage Range
208 → 265V ac/dc
Number of Poles
3
Terminal Type
Screw
Load Voltage Range
48 V ac → 510V ac
Series
DRC
Height
86.71mm
Maximum Operating Temperature
+80°C
Depth
96.02mm
Length
45.31mm
Minimum Operating Temperature
-30°C
Χώρα Προέλευσης
Mexico
Λεπτομέρειες Προϊόντος
Crydom DRC Series Solid State Contactors
Crydom DRC Series Solid State Contactors are intended for frequently switching on and off three phase loads up to 5 HP. They are available in both contactor versions DRC3P and reversing contactor versions DRC3R.
DRC3P are available in either instantaneous turn-on (for Motor Control) or zero voltage turn-on (for Resistive Loads).
DRC3R include an interlock control that allows only off, forward and reverse operation in a safe mode: they switch
instantaneously upon application of the control voltage and when an instantaneous change of direction is commanded they will delay the direction change by 100m/sec in order to prevent simultaneous forward and reverse operations.
This unique solid state contactor can start/stop a 3 Phase AC Motor at a maximum switching frequency of 9000 cycles/hour.
Solid State Contactors
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
€ 140,12
€ 140,12 Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 173,75
€ 173,75 Μονάδας Με Φ.Π.Α
1
€ 140,12
€ 140,12 Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 173,75
€ 173,75 Μονάδας Με Φ.Π.Α
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
1
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
Sensata / CrydomMounting Type
DIN Rail Mount
Control Voltage Range
208 → 265V ac/dc
Number of Poles
3
Terminal Type
Screw
Load Voltage Range
48 V ac → 510V ac
Series
DRC
Height
86.71mm
Maximum Operating Temperature
+80°C
Depth
96.02mm
Length
45.31mm
Minimum Operating Temperature
-30°C
Χώρα Προέλευσης
Mexico
Λεπτομέρειες Προϊόντος
Crydom DRC Series Solid State Contactors
Crydom DRC Series Solid State Contactors are intended for frequently switching on and off three phase loads up to 5 HP. They are available in both contactor versions DRC3P and reversing contactor versions DRC3R.
DRC3P are available in either instantaneous turn-on (for Motor Control) or zero voltage turn-on (for Resistive Loads).
DRC3R include an interlock control that allows only off, forward and reverse operation in a safe mode: they switch
instantaneously upon application of the control voltage and when an instantaneous change of direction is commanded they will delay the direction change by 100m/sec in order to prevent simultaneous forward and reverse operations.
This unique solid state contactor can start/stop a 3 Phase AC Motor at a maximum switching frequency of 9000 cycles/hour.