Sensata Crydom Solid State Relay, 7.6 A Load, DIN Rail Mount
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
Sensata / CrydomMaximum Load Current
7.6 A
Mounting Type
DIN Rail Mount
Control Voltage Range
18 → 30V ac/dc
Number of Poles
3
Terminal Type
Screw
Load Voltage Range
48 → 510V ac
Height
86.71mm
Length
45.31mm
Depth
96.02mm
Minimum Operating Temperature
-30°C
Maximum Operating Temperature
+80°C
Χώρα Προέλευσης
Mexico
Λεπτομέρειες Προϊόντος
Crydom DRC Series Solid State Contactors
Crydom DRC Series Solid State Contactors are intended for frequently switching on and off three phase loads up to 5 HP. They are available in both contactor versions DRC3P and reversing contactor versions DRC3R.
DRC3P are available in either instantaneous turn-on (for Motor Control) or zero voltage turn-on (for Resistive Loads).
DRC3R include an interlock control that allows only off, forward and reverse operation in a safe mode: they switch
instantaneously upon application of the control voltage and when an instantaneous change of direction is commanded they will delay the direction change by 100m/sec in order to prevent simultaneous forward and reverse operations.
This unique solid state contactor can start/stop a 3 Phase AC Motor at a maximum switching frequency of 9000 cycles/hour.
Solid State Contactors
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
Παρακαλούμε ελέγξτε ξανά αργότερα.
€ 114,01
€ 114,01 Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 141,37
€ 141,37 Μονάδας Με Φ.Π.Α
1
€ 114,01
€ 114,01 Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 141,37
€ 141,37 Μονάδας Με Φ.Π.Α
1
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
Sensata / CrydomMaximum Load Current
7.6 A
Mounting Type
DIN Rail Mount
Control Voltage Range
18 → 30V ac/dc
Number of Poles
3
Terminal Type
Screw
Load Voltage Range
48 → 510V ac
Height
86.71mm
Length
45.31mm
Depth
96.02mm
Minimum Operating Temperature
-30°C
Maximum Operating Temperature
+80°C
Χώρα Προέλευσης
Mexico
Λεπτομέρειες Προϊόντος
Crydom DRC Series Solid State Contactors
Crydom DRC Series Solid State Contactors are intended for frequently switching on and off three phase loads up to 5 HP. They are available in both contactor versions DRC3P and reversing contactor versions DRC3R.
DRC3P are available in either instantaneous turn-on (for Motor Control) or zero voltage turn-on (for Resistive Loads).
DRC3R include an interlock control that allows only off, forward and reverse operation in a safe mode: they switch
instantaneously upon application of the control voltage and when an instantaneous change of direction is commanded they will delay the direction change by 100m/sec in order to prevent simultaneous forward and reverse operations.
This unique solid state contactor can start/stop a 3 Phase AC Motor at a maximum switching frequency of 9000 cycles/hour.