Sensata Cynergy3 FS Series Flow Controller, 3.75 L/min, Relay Output, 240 V, 22 mm Pipe

Κωδικός Προϊόντος της RS: 257-082Κατασκευαστής: Sensata / Cynergy3Κωδικός Κατασκευαστή: FS22A
brand-logo

Τεχνικό φυλλάδιο

Προδιαγραφές

Maximum Flow Rate

3.75 L/min

Electrical Connection

Cable

Control Output

Relay

Supply Voltage

240 V

Display Screen

No

Pipe Diameter Range

22 mm

Minimum Operating Temperature

-20°C

Maximum Operating Temperature

+85°C

Series

FS

Current Rating

600 mA

Χώρα Προέλευσης

United Kingdom

Λεπτομέρειες Προϊόντος

Normally Open Flow Switch

Flow switch series from Cynergy3. These flow switches are reed switch based and can monitor the flow of liquids up to 10bar in pressure. This series of flow switches can be mounted horizontally or vertically and have minimal flow restriction. Flow switches are ideally used in water but can be used in weak acidic liquids.

Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη

Παρακαλούμε ελέγξτε ξανά αργότερα.

Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη

€ 41,31

Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α

€ 51,22

Μονάδας (Including VAT) Με Φ.Π.Α

Sensata Cynergy3 FS Series Flow Controller, 3.75 L/min, Relay Output, 240 V, 22 mm Pipe

€ 41,31

Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α

€ 51,22

Μονάδας (Including VAT) Με Φ.Π.Α

Sensata Cynergy3 FS Series Flow Controller, 3.75 L/min, Relay Output, 240 V, 22 mm Pipe
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη

Τεχνικό φυλλάδιο

Προδιαγραφές

Maximum Flow Rate

3.75 L/min

Electrical Connection

Cable

Control Output

Relay

Supply Voltage

240 V

Display Screen

No

Pipe Diameter Range

22 mm

Minimum Operating Temperature

-20°C

Maximum Operating Temperature

+85°C

Series

FS

Current Rating

600 mA

Χώρα Προέλευσης

United Kingdom

Λεπτομέρειες Προϊόντος

Normally Open Flow Switch

Flow switch series from Cynergy3. These flow switches are reed switch based and can monitor the flow of liquids up to 10bar in pressure. This series of flow switches can be mounted horizontally or vertically and have minimal flow restriction. Flow switches are ideally used in water but can be used in weak acidic liquids.