Sensata / Cynergy3 RSF100 Series Vertical Polypropylene Float Switch, Float, 1m Cable, NO/NC, 240V ac Max, 120V dc Max
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
Sensata / Cynergy3Device Type
Float
Mounting Type
Vertical
Switch Output
NO/NC
Body Material
Polypropylene
Cable Length
1m
Minimum Operating Temperature
-20°C
Maximum Operating Temperature
+100°C
Maximum ac Voltage
240V
Maximum dc Voltage
120V
Maximum Current
600 mA
Gasket Material
Nitrile
Series
RSF100
Standards Met
WRAS
Χώρα Προέλευσης
United Kingdom
Λεπτομέρειες Προϊόντος
Cynergy3 Miniature Vertical Float Switch
A single switching point, miniature, vertical fluid level switch. These level switches can be mounted on the top or bottom of the tank and are installed with a compression seal so no access is required to the interior of the tank. Vertical level switches offer long-term reliability and minimal maintenance due to the simplistic construction. The switch can be changed from normally open to normally closed simply by removing and inverting the float.
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
Παρακαλούμε ελέγξτε ξανά αργότερα.
€ 32,97
Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 40,88
Μονάδας (Including VAT) Με Φ.Π.Α
1
€ 32,97
Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 40,88
Μονάδας (Including VAT) Με Φ.Π.Α
1
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
Sensata / Cynergy3Device Type
Float
Mounting Type
Vertical
Switch Output
NO/NC
Body Material
Polypropylene
Cable Length
1m
Minimum Operating Temperature
-20°C
Maximum Operating Temperature
+100°C
Maximum ac Voltage
240V
Maximum dc Voltage
120V
Maximum Current
600 mA
Gasket Material
Nitrile
Series
RSF100
Standards Met
WRAS
Χώρα Προέλευσης
United Kingdom
Λεπτομέρειες Προϊόντος
Cynergy3 Miniature Vertical Float Switch
A single switching point, miniature, vertical fluid level switch. These level switches can be mounted on the top or bottom of the tank and are installed with a compression seal so no access is required to the interior of the tank. Vertical level switches offer long-term reliability and minimal maintenance due to the simplistic construction. The switch can be changed from normally open to normally closed simply by removing and inverting the float.