SMC Membrane Compressed Air Dryer -20°C, IDG30A-F03
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
SMCType
Membrane
Dew Point
-20°C
Inlet Port Size
G 3/8
Maximum Flow Rate
300 (Outlet) L/min, 360 (Inlet) L/min
Manufacturer Series
IDG
Outlet Port Size
G 3/8
Outlet Port - Thread Size
42950
Maximum Ambient Operating Temperature
25°C
Minimum Ambient Operating Temperature
-5°C
Minimum Process Operating Temperature
-5°C
Overall Length
291mm
Maximum Process Operating Temperature
25°C
Process Operating Temperature Range
-5 → +50°C
Inlet Port Thread Standard
G
Overall Dimensions
291 x 70 x 70mm
Inlet Port - Thread Size
42950
Outlet Port - Thread Standard
G
Ambient Operating Temperature Range
-5 → +50°C
Overall Width
70mm
Minimum Operating Inlet Pressure
0.3MPa
Overall Height
70mm
Maximum Operating Inlet Pressure
1MPa
Χώρα Προέλευσης
Japan
Λεπτομέρειες Προϊόντος
IDG Series, Membrane Air Dryer
SMC's Membrane air dryer series IDG is available in a single unit or combination unit style. IDG/M models combine a mist separator and micro mist separator with a single unit. IDG/V models combine a regulator with the IDG/M model. Options available include one-touch fitting exhaust of purge air. If purged air is not exhausted around membrane air dryer, air is exhausted with tubing away from its dryer.
A reliable, efficient and an economical alternative to pressure swing and refrigerant dryer technologies.
Dry Air Systems
Compressed air is an essential power source that is widely used throughout industry. This safe, powerful and reliable utility can be the most important part of a production process. However compressed air will contain water, dirt, wear particles, bacteria and even degraded lubricating oil which all mix together to form an unwanted abrasive sludge. This sludge, often acidic, rapidly wears tools and pneumatic machinery, block valves and orifices causing high maintenance and costly leaks. It also corrodes piping systems and can bring a production process to an extremely expensive standstill. Only compressed air that is totally clean and dry will ensure maximum savings.
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
Παρακαλούμε ελέγξτε ξανά αργότερα.
P.O.A.
1
P.O.A.
1
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
SMCType
Membrane
Dew Point
-20°C
Inlet Port Size
G 3/8
Maximum Flow Rate
300 (Outlet) L/min, 360 (Inlet) L/min
Manufacturer Series
IDG
Outlet Port Size
G 3/8
Outlet Port - Thread Size
42950
Maximum Ambient Operating Temperature
25°C
Minimum Ambient Operating Temperature
-5°C
Minimum Process Operating Temperature
-5°C
Overall Length
291mm
Maximum Process Operating Temperature
25°C
Process Operating Temperature Range
-5 → +50°C
Inlet Port Thread Standard
G
Overall Dimensions
291 x 70 x 70mm
Inlet Port - Thread Size
42950
Outlet Port - Thread Standard
G
Ambient Operating Temperature Range
-5 → +50°C
Overall Width
70mm
Minimum Operating Inlet Pressure
0.3MPa
Overall Height
70mm
Maximum Operating Inlet Pressure
1MPa
Χώρα Προέλευσης
Japan
Λεπτομέρειες Προϊόντος
IDG Series, Membrane Air Dryer
SMC's Membrane air dryer series IDG is available in a single unit or combination unit style. IDG/M models combine a mist separator and micro mist separator with a single unit. IDG/V models combine a regulator with the IDG/M model. Options available include one-touch fitting exhaust of purge air. If purged air is not exhausted around membrane air dryer, air is exhausted with tubing away from its dryer.
A reliable, efficient and an economical alternative to pressure swing and refrigerant dryer technologies.
Dry Air Systems
Compressed air is an essential power source that is widely used throughout industry. This safe, powerful and reliable utility can be the most important part of a production process. However compressed air will contain water, dirt, wear particles, bacteria and even degraded lubricating oil which all mix together to form an unwanted abrasive sludge. This sludge, often acidic, rapidly wears tools and pneumatic machinery, block valves and orifices causing high maintenance and costly leaks. It also corrodes piping systems and can bring a production process to an extremely expensive standstill. Only compressed air that is totally clean and dry will ensure maximum savings.