Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
STMicroelectronicsProduct Type
Motor Driver IC
Motor Type
Brushed DC Motor
Configuration
Full Bridge
Maximum IGBT Collector Current
4A
Maximum Collector Emitter Voltage Vceo
46V
Mount Type
Surface
Package Type
PowerSO
Output Current
3A
Pin Count
20
Maximum Supply Voltage
46V
Minimum Supply Voltage
4.8V
Typical Switching Frequency
25kHz
Minimum Operating Temperature
-25°C
Maximum Operating Temperature
130°C
Length
16mm
Standards/Approvals
No
Width
11.1 mm
Series
L298
Height
3.3mm
Inverter Power Rating
25W
Supply Current
100μA
Automotive Standard
No
Χώρα Προέλευσης
Malaysia
Λεπτομέρειες Προϊόντος
L298 Dual Full Bridge Motor Driver
ST Microelectronics presents its L298 dual full bridge driver series. The L298 series from ST is an integrated high voltage, high current dual full bridge driver. These devices are specially designed to accept standard TTL logic and drive inductive loads in Relays, Solenoids, DC and Stepper Motors. Featured are two enable inputs that allow the L298 to be enabled or disabled independently of the input signals. The emitters of the lower transistors of each bridge are connected together, the corresponding external terminal can be used to connect an external sensing resistor. In addition, a supply input is provided so that the logic works at a lower voltage.
Motor Controllers & Drivers, STMicroelectronics
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
€ 5.856,00
€ 9,76 Μονάδας (Σε ένα καρούλι των 600) (Exc. Vat)Χωρίς Φ.Π.Α
€ 7.261,44
€ 12,102 Μονάδας (Σε ένα καρούλι των 600) Με Φ.Π.Α
600
€ 5.856,00
€ 9,76 Μονάδας (Σε ένα καρούλι των 600) (Exc. Vat)Χωρίς Φ.Π.Α
€ 7.261,44
€ 12,102 Μονάδας (Σε ένα καρούλι των 600) Με Φ.Π.Α
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
600
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
STMicroelectronicsProduct Type
Motor Driver IC
Motor Type
Brushed DC Motor
Configuration
Full Bridge
Maximum IGBT Collector Current
4A
Maximum Collector Emitter Voltage Vceo
46V
Mount Type
Surface
Package Type
PowerSO
Output Current
3A
Pin Count
20
Maximum Supply Voltage
46V
Minimum Supply Voltage
4.8V
Typical Switching Frequency
25kHz
Minimum Operating Temperature
-25°C
Maximum Operating Temperature
130°C
Length
16mm
Standards/Approvals
No
Width
11.1 mm
Series
L298
Height
3.3mm
Inverter Power Rating
25W
Supply Current
100μA
Automotive Standard
No
Χώρα Προέλευσης
Malaysia
Λεπτομέρειες Προϊόντος
L298 Dual Full Bridge Motor Driver
ST Microelectronics presents its L298 dual full bridge driver series. The L298 series from ST is an integrated high voltage, high current dual full bridge driver. These devices are specially designed to accept standard TTL logic and drive inductive loads in Relays, Solenoids, DC and Stepper Motors. Featured are two enable inputs that allow the L298 to be enabled or disabled independently of the input signals. The emitters of the lower transistors of each bridge are connected together, the corresponding external terminal can be used to connect an external sensing resistor. In addition, a supply input is provided so that the logic works at a lower voltage.


