Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
STMicroelectronicsMotor Type
Brushed DC
Output Configuration
Dual Full Bridge
Maximum IGBT Collector Current
2.8A
Maximum Collector Emitter Voltage
52 V
Mounting Type
Surface Mount
Package Type
PowerSO
Maximum Operating Supply Voltage
52 V
Pin Count
20
Minimum Operating Supply Voltage
8 V
Typical Switching Frequency
100kHz
Length
16mm
Height
3.3mm
Width
11.1mm
Dimensions
16 x 11.1 x 3.3mm
Maximum Operating Temperature
+150 °C
Minimum Operating Temperature
-40 °C
Λεπτομέρειες Προϊόντος
Motor Control Power Drivers, STMicroelectronics
The range of power drivers by STMicroelectronics are designed to drive a motor or a complex load through the logic commands at its input. They can be used with microcontrollers, DSPs or FPGAs in a motor or motion control system. The power drivers come in Dual Full Bridge, Full Bridge and 3 phase.
Motor Controllers & Drivers, STMicroelectronics
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
Παρακαλούμε ελέγξτε ξανά αργότερα.
€ 59,00
€ 11,80 Μονάδας (διαθέσιμο σε μία ράγα) (Exc. Vat)Χωρίς Φ.Π.Α
€ 73,16
€ 14,63 Μονάδας (διαθέσιμο σε μία ράγα) Με Φ.Π.Α
Συσκευασία Παραγωγής (Ράγα)
5
€ 59,00
€ 11,80 Μονάδας (διαθέσιμο σε μία ράγα) (Exc. Vat)Χωρίς Φ.Π.Α
€ 73,16
€ 14,63 Μονάδας (διαθέσιμο σε μία ράγα) Με Φ.Π.Α
Συσκευασία Παραγωγής (Ράγα)
5
Αγοράστε μαζικά
Quantity Ποσότητα | Τιμή μονάδας |
---|---|
5 - 9 | € 11,80 |
10 - 24 | € 10,81 |
25 - 49 | € 9,87 |
50+ | € 9,50 |
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
STMicroelectronicsMotor Type
Brushed DC
Output Configuration
Dual Full Bridge
Maximum IGBT Collector Current
2.8A
Maximum Collector Emitter Voltage
52 V
Mounting Type
Surface Mount
Package Type
PowerSO
Maximum Operating Supply Voltage
52 V
Pin Count
20
Minimum Operating Supply Voltage
8 V
Typical Switching Frequency
100kHz
Length
16mm
Height
3.3mm
Width
11.1mm
Dimensions
16 x 11.1 x 3.3mm
Maximum Operating Temperature
+150 °C
Minimum Operating Temperature
-40 °C
Λεπτομέρειες Προϊόντος
Motor Control Power Drivers, STMicroelectronics
The range of power drivers by STMicroelectronics are designed to drive a motor or a complex load through the logic commands at its input. They can be used with microcontrollers, DSPs or FPGAs in a motor or motion control system. The power drivers come in Dual Full Bridge, Full Bridge and 3 phase.