Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
STMicroelectronicsMotor Type
BLDC
Output Configuration
3 Phase
Maximum IGBT Collector Current
1.4A
Maximum Collector Emitter Voltage
52 V
Mounting Type
Surface Mount
Package Type
PowerSO
Pin Count
36
Maximum Operating Supply Voltage
52 V
Minimum Operating Supply Voltage
8 V
Typical Switching Frequency
100kHz
Dimensions
16 x 11.1 x 3.3mm
Maximum Operating Temperature
+150 °C
Length
16mm
Height
3.3mm
Width
11.1mm
Minimum Operating Temperature
-40 °C
Λεπτομέρειες Προϊόντος
Motor Control Power Drivers, STMicroelectronics
The range of power drivers by STMicroelectronics are designed to drive a motor or a complex load through the logic commands at its input. They can be used with microcontrollers, DSPs or FPGAs in a motor or motion control system. The power drivers come in Dual Full Bridge, Full Bridge and 3 phase.
Motor Controllers & Drivers, STMicroelectronics
€ 89,40
€ 17,88 Μονάδας (διαθέσιμο σε μία ράγα) (Exc. Vat)Χωρίς Φ.Π.Α
€ 110,86
€ 22,17 Μονάδας (διαθέσιμο σε μία ράγα) Με Φ.Π.Α
Συσκευασία Παραγωγής (Ράγα)
5
€ 89,40
€ 17,88 Μονάδας (διαθέσιμο σε μία ράγα) (Exc. Vat)Χωρίς Φ.Π.Α
€ 110,86
€ 22,17 Μονάδας (διαθέσιμο σε μία ράγα) Με Φ.Π.Α
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
Συσκευασία Παραγωγής (Ράγα)
5
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
| Quantity Ποσότητα | Τιμή μονάδας |
|---|---|
| 5 - 9 | € 17,88 |
| 10 - 24 | € 16,37 |
| 25 - 49 | € 14,96 |
| 50+ | € 14,41 |
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
STMicroelectronicsMotor Type
BLDC
Output Configuration
3 Phase
Maximum IGBT Collector Current
1.4A
Maximum Collector Emitter Voltage
52 V
Mounting Type
Surface Mount
Package Type
PowerSO
Pin Count
36
Maximum Operating Supply Voltage
52 V
Minimum Operating Supply Voltage
8 V
Typical Switching Frequency
100kHz
Dimensions
16 x 11.1 x 3.3mm
Maximum Operating Temperature
+150 °C
Length
16mm
Height
3.3mm
Width
11.1mm
Minimum Operating Temperature
-40 °C
Λεπτομέρειες Προϊόντος
Motor Control Power Drivers, STMicroelectronics
The range of power drivers by STMicroelectronics are designed to drive a motor or a complex load through the logic commands at its input. They can be used with microcontrollers, DSPs or FPGAs in a motor or motion control system. The power drivers come in Dual Full Bridge, Full Bridge and 3 phase.


