Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
STMicroelectronicsMotor Type
BLDC
Output Configuration
3 Phase
Maximum IGBT Collector Current
2.8A
Maximum Collector Emitter Voltage
52 V
Mounting Type
Surface Mount
Package Type
SOIC
Pin Count
24
Maximum Operating Supply Voltage
52 V
Minimum Operating Supply Voltage
12 V
Dimensions
15.6 x 7.6 x 2.35mm
Maximum Operating Temperature
+150 °C
Length
15.6mm
Height
2.35mm
Width
7.6mm
Minimum Operating Temperature
-40 °C
Λεπτομέρειες Προϊόντος
Three Phase BLDC Motor Drivers, STMicroelectronics
The Brushless DC Motor Drivers include power drivers in a 3 phase bridge configuration. The ICs integrate decoding logic for Hall-effect sensors and a PWM current controller to drive autonomously a BLDC motor with microcontroller commands.
A robust and reliable electronic design can depend on the build-in circuit protection and diagnostic features from over-temperature, overcurrent and under-voltage conditions.
Motor Controllers & Drivers, STMicroelectronics
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
Παρακαλούμε ελέγξτε ξανά αργότερα.
€ 6,96
Μονάδας (Σε μία ράγα των 32) (Exc. Vat)Χωρίς Φ.Π.Α
€ 8,63
Μονάδας (Σε μία ράγα των 32) Με Φ.Π.Α
32
€ 6,96
Μονάδας (Σε μία ράγα των 32) (Exc. Vat)Χωρίς Φ.Π.Α
€ 8,63
Μονάδας (Σε μία ράγα των 32) Με Φ.Π.Α
32
Αγοράστε μαζικά
Quantity Ποσότητα | Τιμή μονάδας | Per Ράγα |
---|---|---|
32 - 32 | € 6,96 | € 222,72 |
64 - 128 | € 5,80 | € 185,60 |
160+ | € 5,70 | € 182,40 |
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
STMicroelectronicsMotor Type
BLDC
Output Configuration
3 Phase
Maximum IGBT Collector Current
2.8A
Maximum Collector Emitter Voltage
52 V
Mounting Type
Surface Mount
Package Type
SOIC
Pin Count
24
Maximum Operating Supply Voltage
52 V
Minimum Operating Supply Voltage
12 V
Dimensions
15.6 x 7.6 x 2.35mm
Maximum Operating Temperature
+150 °C
Length
15.6mm
Height
2.35mm
Width
7.6mm
Minimum Operating Temperature
-40 °C
Λεπτομέρειες Προϊόντος
Three Phase BLDC Motor Drivers, STMicroelectronics
The Brushless DC Motor Drivers include power drivers in a 3 phase bridge configuration. The ICs integrate decoding logic for Hall-effect sensors and a PWM current controller to drive autonomously a BLDC motor with microcontroller commands.
A robust and reliable electronic design can depend on the build-in circuit protection and diagnostic features from over-temperature, overcurrent and under-voltage conditions.