STMicroelectronics 1500 W Motor Control Power Board Based on STGIB15CH60TS-L SLLIMM 2nd Series IPM Motor Control for

Name: STMicroelectronics 1500 W Motor Control Power Board Based on STGIB15CH60TS-L SLLIMM 2nd Series IPM Motor Control for
Brand: STMicroelectronics
SKU: 1962562
Availability: LimitedAvailability

Κωδικός Προϊόντος της RS: 196-2562Κατασκευαστής: STMicroelectronicsΚωδικός Κατασκευαστή: STEVAL-IPM15B

Προβολή όλων σε Power, Motor & Robotics Development Tools

Τεχνικό φυλλάδιο

Προδιαγραφές

Brand

STMicroelectronics

Product Type

Power Management Development Kit

Power Management Function

Motor Control

For Use With

1500 W Motor Control

Kit Classification

Evaluation Board

Featured Device

STGIB15CH60TS-L

Kit Name

1500 W Motor Control Power Board Based on STGIB15CH60TS-L SLLIMM 2nd Series IPM

Standards/Approvals

RoHS

Χώρα Προέλευσης

Italy

Λεπτομέρειες Προϊόντος

The STEVAL-IPM15B is a compact motor drive power board based on the SLLIMM™
(small low-loss intelligent molded module) 2nd series module STGIB15CH60TS-L. It
provides an affordable, easy-to-use solution for driving high power motors for a wide
range of applications such as white goods, air conditioners, compressors, power
fans, high-end power tools, and generally 3-phase inverters for motor drives. The
IPM itself consists of short-circuit rugged IGBTs and a wide range of features
including undervoltage lockout, smart shutdown, temperature sensing and NTC
inside, and overcurrent protection. The main characteristics of this evaluation board
are its small size, minimal BOM and high efficiency. It consists of an interface circuit
(BUS and Vcc connectors), bootstrap capacitors, snubber capacitor, hardware shortcircuit protection, fault event signal and temperature monitoring. In order to increase
its flexibility, it was designed to work in single or three-shunt configuration and with
double current sensing options such as three dedicated op-amps on-board, or opamps embedded on the MCU. A Hall/Encoder part completes the circuit. Thanks to
these advanced characteristics, the system has been specifically designed to
achieve accurate and fast conditioning of the current feedback, matching the typical
requirements for field-oriented control (FOC). The STEVAL-IPM15B is compatible
with STs STM32-based control board, providing a complete platform for motor
control.

Προβολή όλων σε Power, Motor & Robotics Development Tools

Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη

€ 133,18

€ 133,18 Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α

€ 165,14

€ 165,14 Μονάδας Με Φ.Π.Α

STMicroelectronics 1500 W Motor Control Power Board Based on STGIB15CH60TS-L SLLIMM 2nd Series IPM Motor Control for

€ 133,18

€ 133,18 Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α

€ 165,14

€ 165,14 Μονάδας Με Φ.Π.Α

STMicroelectronics 1500 W Motor Control Power Board Based on STGIB15CH60TS-L SLLIMM 2nd Series IPM Motor Control for

Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη

Τεχνικό φυλλάδιο

Προδιαγραφές

Brand

STMicroelectronics

Product Type

Power Management Development Kit

Power Management Function

Motor Control

For Use With

1500 W Motor Control

Kit Classification

Evaluation Board

Featured Device

STGIB15CH60TS-L

Kit Name

1500 W Motor Control Power Board Based on STGIB15CH60TS-L SLLIMM 2nd Series IPM

Standards/Approvals

RoHS

Χώρα Προέλευσης

Italy

Λεπτομέρειες Προϊόντος

The STEVAL-IPM15B is a compact motor drive power board based on the SLLIMM™
(small low-loss intelligent molded module) 2nd series module STGIB15CH60TS-L. It
provides an affordable, easy-to-use solution for driving high power motors for a wide
range of applications such as white goods, air conditioners, compressors, power
fans, high-end power tools, and generally 3-phase inverters for motor drives. The
IPM itself consists of short-circuit rugged IGBTs and a wide range of features
including undervoltage lockout, smart shutdown, temperature sensing and NTC
inside, and overcurrent protection. The main characteristics of this evaluation board
are its small size, minimal BOM and high efficiency. It consists of an interface circuit
(BUS and Vcc connectors), bootstrap capacitors, snubber capacitor, hardware shortcircuit protection, fault event signal and temperature monitoring. In order to increase
its flexibility, it was designed to work in single or three-shunt configuration and with
double current sensing options such as three dedicated op-amps on-board, or opamps embedded on the MCU. A Hall/Encoder part completes the circuit. Thanks to
these advanced characteristics, the system has been specifically designed to
achieve accurate and fast conditioning of the current feedback, matching the typical
requirements for field-oriented control (FOC). The STEVAL-IPM15B is compatible
with STs STM32-based control board, providing a complete platform for motor
control.