Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
STMicroelectronicsProduct Type
LED Driver Evaluation Kit
LED Technology
LED Driver
Kit Classification
Demonstration Board
For Use With
LED Driver
Featured Device
STP4CMP
Kit Name
STEVAL
Standards/Approvals
RoHS
Χώρα Προέλευσης
Italy
Λεπτομέρειες Προϊόντος
The STEVAL-TLL012V1 demonstration board demonstrates the performance of the STP4CMP, a charge pump based 4-channel LED driver designed for RGB illumination or LCD display backlighting. This device works off a battery with an input voltage between 2.7 V - 5.5 V. The device generates regulated current sinks with high absolute and channel-to-channel accuracy to drive up to 4 LEDs.
It can support LEDs with forward voltage as high as 3.8 V.
The current sink for each channel can be set with 4 individual external resistors. Each channel is controlled independently.
The PWM control can be applied directly to the 4 EN (enable) inputs to provide brightness control.
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
€ 106,71
€ 106,71 Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 132,32
€ 132,32 Μονάδας Με Φ.Π.Α
1
€ 106,71
€ 106,71 Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 132,32
€ 132,32 Μονάδας Με Φ.Π.Α
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
1
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
STMicroelectronicsProduct Type
LED Driver Evaluation Kit
LED Technology
LED Driver
Kit Classification
Demonstration Board
For Use With
LED Driver
Featured Device
STP4CMP
Kit Name
STEVAL
Standards/Approvals
RoHS
Χώρα Προέλευσης
Italy
Λεπτομέρειες Προϊόντος
The STEVAL-TLL012V1 demonstration board demonstrates the performance of the STP4CMP, a charge pump based 4-channel LED driver designed for RGB illumination or LCD display backlighting. This device works off a battery with an input voltage between 2.7 V - 5.5 V. The device generates regulated current sinks with high absolute and channel-to-channel accuracy to drive up to 4 LEDs.
It can support LEDs with forward voltage as high as 3.8 V.
The current sink for each channel can be set with 4 individual external resistors. Each channel is controlled independently.
The PWM control can be applied directly to the 4 EN (enable) inputs to provide brightness control.
