TE Connectivity Straight Black, Fluid Resistant Elastomer, 24mm
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
TE ConnectivityType
Straight
Inside Diameter Primary
24mm
Inside Diameter Secondary
24mm
Adhesive Lined
No
Material
Fluid Resistant Elastomer
Number of Breakouts
1
Colour
Black
Minimum Operating Temperature
-75°C
Maximum Operating Temperature
+150°C
Shrunk Diameter Primary
10.4mm
Shrunk Diameter Secondary
5.6mm
Χώρα Προέλευσης
Mexico
Λεπτομέρειες Προϊόντος
General Purpose (Lipped) - 202K1 and 222K1 Series
Moulded parts that provide durable strain relief, protection and an environmental seal when used with an adhesive. Available in straight and right angled types, these chemical and abrasion resistant heat shrink boots are made from a tough modified elastomer, and meet the Def Stan 59-97 Issue 3 Type DE requirements. Other features include recommended shrink temperature 175°C, self-extinguishing to RK6713 and an electric strength of 12MV/m (min.) Meets specification VG95343 parts 6, 7, 8, 9. These boots can be used with spin coupling backshells, but may also be used wherever a connector offers a suitable rear mounting.
€ 28,74
€ 28,74 Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 35,64
€ 35,64 Μονάδας Με Φ.Π.Α
1
€ 28,74
€ 28,74 Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 35,64
€ 35,64 Μονάδας Με Φ.Π.Α
1
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
Παρακαλούμε ελέγξτε ξανά αργότερα.
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
TE ConnectivityType
Straight
Inside Diameter Primary
24mm
Inside Diameter Secondary
24mm
Adhesive Lined
No
Material
Fluid Resistant Elastomer
Number of Breakouts
1
Colour
Black
Minimum Operating Temperature
-75°C
Maximum Operating Temperature
+150°C
Shrunk Diameter Primary
10.4mm
Shrunk Diameter Secondary
5.6mm
Χώρα Προέλευσης
Mexico
Λεπτομέρειες Προϊόντος
General Purpose (Lipped) - 202K1 and 222K1 Series
Moulded parts that provide durable strain relief, protection and an environmental seal when used with an adhesive. Available in straight and right angled types, these chemical and abrasion resistant heat shrink boots are made from a tough modified elastomer, and meet the Def Stan 59-97 Issue 3 Type DE requirements. Other features include recommended shrink temperature 175°C, self-extinguishing to RK6713 and an electric strength of 12MV/m (min.) Meets specification VG95343 parts 6, 7, 8, 9. These boots can be used with spin coupling backshells, but may also be used wherever a connector offers a suitable rear mounting.