TE Connectivity Boot 222K1 Black, Fluid Resistant Elastomer, 43 mm
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
TE ConnectivitySub Type
Boot
Product Type
Heat Shrink Boot
Material
Fluid Resistant Elastomer
Number of Breakouts
1
Shrink Temperature
90°C
Colour
Black
Minimum Operating Temperature
-75°C
Maximum Operating Temperature
150°C
Maximum Inside Diameter
43mm
Maximum Shrunk Diameter
28mm
Minimum Inside Diameter
10mm
Standards/Approvals
No
Series
222K1
Adhesive Backing
No
Λεπτομέρειες Προϊόντος
General Purpose (Lipped) - 202K1 and 222K1 Series
Moulded parts that provide durable strain relief, protection and an environmental seal when used with an adhesive. Available in straight and right angled types, these chemical and abrasion resistant heat shrink boots are made from a tough modified elastomer, and meet the Def Stan 59-97 Issue 3 Type DE requirements. Other features include recommended shrink temperature 175°C, self-extinguishing to RK6713 and an electric strength of 12MV/m (min.) Meets specification VG95343 parts 6, 7, 8, 9. These boots can be used with spin coupling backshells, but may also be used wherever a connector offers a suitable rear mounting.
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
€ 43,41
€ 43,41 Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 53,83
€ 53,83 Μονάδας Με Φ.Π.Α
1
€ 43,41
€ 43,41 Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 53,83
€ 53,83 Μονάδας Με Φ.Π.Α
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
1
| Quantity Ποσότητα | Τιμή μονάδας |
|---|---|
| 1 - 14 | € 43,41 |
| 15 - 49 | € 42,65 |
| 50+ | € 41,56 |
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
TE ConnectivitySub Type
Boot
Product Type
Heat Shrink Boot
Material
Fluid Resistant Elastomer
Number of Breakouts
1
Shrink Temperature
90°C
Colour
Black
Minimum Operating Temperature
-75°C
Maximum Operating Temperature
150°C
Maximum Inside Diameter
43mm
Maximum Shrunk Diameter
28mm
Minimum Inside Diameter
10mm
Standards/Approvals
No
Series
222K1
Adhesive Backing
No
Λεπτομέρειες Προϊόντος
General Purpose (Lipped) - 202K1 and 222K1 Series
Moulded parts that provide durable strain relief, protection and an environmental seal when used with an adhesive. Available in straight and right angled types, these chemical and abrasion resistant heat shrink boots are made from a tough modified elastomer, and meet the Def Stan 59-97 Issue 3 Type DE requirements. Other features include recommended shrink temperature 175°C, self-extinguishing to RK6713 and an electric strength of 12MV/m (min.) Meets specification VG95343 parts 6, 7, 8, 9. These boots can be used with spin coupling backshells, but may also be used wherever a connector offers a suitable rear mounting.