TE Connectivity Duraseal Red Insulated Female Spade Connector, Receptacle, 6.35 x 0.81mm Tab Size, 0.3mm² to 0.9mm²
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
TE ConnectivityType
Receptacle
Minimum Wire Size mm²
0.3mm²
Gender
Female
Maximum Wire Size mm²
0.9mm²
Tab Size
6.35 x 0.81mm
Insulation
Insulated
Minimum Wire Size AWG
22AWG
Maximum Wire Size AWG
18AWG
Termination Method
Crimp
Colour
Red
Contact Material
Brass
Contact Plating
Tin
Insulation Material
Heat-shrinkable Nylon
Series
Duraseal
Χώρα Προέλευσης
Mexico
Λεπτομέρειες Προϊόντος
Receptacle
From TE Connectivity, Duraseal heat shrinkable crimp connectors. Non-coated crimp contacts for use with superseal PCB connectors are also included in this range (see stock number 680-2063.)
Approvals
UL
Duraseal Heatshrinkable
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.
Approvals
UL Listed
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
Παρακαλούμε ελέγξτε ξανά αργότερα.
€ 1.426,41
1 Κουτί των 1000 (Exc. Vat)Χωρίς Φ.Π.Α
€ 1.768,75
1 Κουτί των 1000 (Including VAT) Με Φ.Π.Α
1
€ 1.426,41
1 Κουτί των 1000 (Exc. Vat)Χωρίς Φ.Π.Α
€ 1.768,75
1 Κουτί των 1000 (Including VAT) Με Φ.Π.Α
1
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
TE ConnectivityType
Receptacle
Minimum Wire Size mm²
0.3mm²
Gender
Female
Maximum Wire Size mm²
0.9mm²
Tab Size
6.35 x 0.81mm
Insulation
Insulated
Minimum Wire Size AWG
22AWG
Maximum Wire Size AWG
18AWG
Termination Method
Crimp
Colour
Red
Contact Material
Brass
Contact Plating
Tin
Insulation Material
Heat-shrinkable Nylon
Series
Duraseal
Χώρα Προέλευσης
Mexico
Λεπτομέρειες Προϊόντος
Receptacle
From TE Connectivity, Duraseal heat shrinkable crimp connectors. Non-coated crimp contacts for use with superseal PCB connectors are also included in this range (see stock number 680-2063.)
Approvals
UL
Duraseal Heatshrinkable
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.
Approvals
UL Listed