TE Connectivity Transparent Polyolefin Solder Sleeve 32.5mm Length 7.3 mm Cable Diameter 2.8 mm Cable Diameter
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
TE ConnectivityProduct Type
Solder Sleeve
Sleeve Length
32.5mm
Material
Polyolefin
Dielectric Strength
1kV
Minimum Cable Diameter
2.8mm
Maximum Cable Diameter
7.3mm
Colour
Transparent
Minimum Operating Temperature
-55°C
Maximum Operating Temperature
125°C
Standards/Approvals
ANSI J-STD-004, ANSI J-STD-006
Shrink Temperature
85°C
Series
B-155
Χώρα Προέλευσης
Mexico
Λεπτομέρειες Προϊόντος
Solder Sleeves®
A one piece soldering system for jointing signal cables and terminating cable screens. The system consists of heat shrinkable sleeve containing a predetermined amount of fluxed solder and a thermoplastic sealing insert at each end. The solder sleeve is placed over the joint to be made and the sleeve is heated by a heat gun. The sleeve shrinks, the sealing inserts melt and flow and the solder starts to melt. Heating is continued until the solder is seen to fully melt and flow. Temperature range -55°C to +125°C.
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
€ 222,00
€ 2,22 Μονάδας (Σε ένα πακέτο των 100) (Exc. Vat)Χωρίς Φ.Π.Α
€ 275,28
€ 2,753 Μονάδας (Σε ένα πακέτο των 100) Με Φ.Π.Α
100
€ 222,00
€ 2,22 Μονάδας (Σε ένα πακέτο των 100) (Exc. Vat)Χωρίς Φ.Π.Α
€ 275,28
€ 2,753 Μονάδας (Σε ένα πακέτο των 100) Με Φ.Π.Α
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
100
| Quantity Ποσότητα | Τιμή μονάδας | Per Πακέτο |
|---|---|---|
| 100 - 1400 | € 2,22 | € 222,00 |
| 1500 - 4900 | € 2,14 | € 214,00 |
| 5000+ | € 2,04 | € 204,00 |
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
TE ConnectivityProduct Type
Solder Sleeve
Sleeve Length
32.5mm
Material
Polyolefin
Dielectric Strength
1kV
Minimum Cable Diameter
2.8mm
Maximum Cable Diameter
7.3mm
Colour
Transparent
Minimum Operating Temperature
-55°C
Maximum Operating Temperature
125°C
Standards/Approvals
ANSI J-STD-004, ANSI J-STD-006
Shrink Temperature
85°C
Series
B-155
Χώρα Προέλευσης
Mexico
Λεπτομέρειες Προϊόντος
Solder Sleeves®
A one piece soldering system for jointing signal cables and terminating cable screens. The system consists of heat shrinkable sleeve containing a predetermined amount of fluxed solder and a thermoplastic sealing insert at each end. The solder sleeve is placed over the joint to be made and the sleeve is heated by a heat gun. The sleeve shrinks, the sealing inserts melt and flow and the solder starts to melt. Heating is continued until the solder is seen to fully melt and flow. Temperature range -55°C to +125°C.