TE Connectivity Red Polyolefin Solder Sleeve 42mm Length 1.3 → 2.7mm Cable Diameter

Κωδικός Προϊόντος της RS: 136-2080Κατασκευαστής: TE ConnectivityΚωδικός Κατασκευαστή: B-155-9002
brand-logo
Προβολή όλων σε Solder Sleeves

Τεχνικό φυλλάδιο

Προδιαγραφές

Minimum Cable Diameter

1.3mm

Maximum Cable Diameter

2.7mm

Sleeve Length

42mm

Material

Polyolefin

Minimum Operating Temperature

-55°C

Maximum Operating Temperature

+125°C

Quantity

2

Colour

Red

Series

B-155

Standards Met

ANSI J-STD-004, ANSI J-STD-006

Shrink Temperature

+85°C

Χώρα Προέλευσης

Mexico

Λεπτομέρειες Προϊόντος

Solder Sleeves®

A one piece soldering system for jointing signal cables and terminating cable screens. The system consists of heat shrinkable sleeve containing a predetermined amount of fluxed solder and a thermoplastic sealing insert at each end. The solder sleeve is placed over the joint to be made and the sleeve is heated by a heat gun. The sleeve shrinks, the sealing inserts melt and flow and the solder starts to melt. Heating is continued until the solder is seen to fully melt and flow. Temperature range -55°C to +125°C.

€ 146,36

€ 146,36 1 Κουτί των 100 (Exc. Vat)Χωρίς Φ.Π.Α

€ 181,49

€ 181,49 1 Κουτί των 100 Με Φ.Π.Α

TE Connectivity Red Polyolefin Solder Sleeve 42mm Length 1.3 → 2.7mm Cable Diameter

€ 146,36

€ 146,36 1 Κουτί των 100 (Exc. Vat)Χωρίς Φ.Π.Α

€ 181,49

€ 181,49 1 Κουτί των 100 Με Φ.Π.Α

TE Connectivity Red Polyolefin Solder Sleeve 42mm Length 1.3 → 2.7mm Cable Diameter

Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη

Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη

Τεχνικό φυλλάδιο

Προδιαγραφές

Minimum Cable Diameter

1.3mm

Maximum Cable Diameter

2.7mm

Sleeve Length

42mm

Material

Polyolefin

Minimum Operating Temperature

-55°C

Maximum Operating Temperature

+125°C

Quantity

2

Colour

Red

Series

B-155

Standards Met

ANSI J-STD-004, ANSI J-STD-006

Shrink Temperature

+85°C

Χώρα Προέλευσης

Mexico

Λεπτομέρειες Προϊόντος

Solder Sleeves®

A one piece soldering system for jointing signal cables and terminating cable screens. The system consists of heat shrinkable sleeve containing a predetermined amount of fluxed solder and a thermoplastic sealing insert at each end. The solder sleeve is placed over the joint to be made and the sleeve is heated by a heat gun. The sleeve shrinks, the sealing inserts melt and flow and the solder starts to melt. Heating is continued until the solder is seen to fully melt and flow. Temperature range -55°C to +125°C.