TE Connectivity, DuraSeal Butt Splice Connector, Yellow, Insulated, Tin 12 → 10 AWG
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
TE ConnectivitySplice Type
Butt
Wire Size
12 → 10 AWG
Overall Length
43mm
Diameter
6.5mm
Insulation
Insulated
Colour
Yellow
Series
Duraseal
Contact Material
Copper
Contact Plating
Tin
Thickness
3mm
Χώρα Προέλευσης
Mexico
Λεπτομέρειες Προϊόντος
Splices
Approvals
UL
Duraseal Heatshrinkable
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.
Approvals
UL Listed
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
Παρακαλούμε ελέγξτε ξανά αργότερα.
€ 1,01
Μονάδας (Σε ένα πακέτο των 50) (Exc. Vat)Χωρίς Φ.Π.Α
€ 1,252
Μονάδας (Σε ένα πακέτο των 50) (Including VAT) Με Φ.Π.Α
50
€ 1,01
Μονάδας (Σε ένα πακέτο των 50) (Exc. Vat)Χωρίς Φ.Π.Α
€ 1,252
Μονάδας (Σε ένα πακέτο των 50) (Including VAT) Με Φ.Π.Α
50
Αγοράστε μαζικά
| Quantity Ποσότητα | Τιμή μονάδας | Per Πακέτο |
|---|---|---|
| 50 - 200 | € 1,01 | € 50,50 |
| 250 - 1200 | € 0,93 | € 46,50 |
| 1250 - 2450 | € 0,86 | € 43,00 |
| 2500 - 4950 | € 0,78 | € 39,00 |
| 5000+ | € 0,76 | € 38,00 |
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
TE ConnectivitySplice Type
Butt
Wire Size
12 → 10 AWG
Overall Length
43mm
Diameter
6.5mm
Insulation
Insulated
Colour
Yellow
Series
Duraseal
Contact Material
Copper
Contact Plating
Tin
Thickness
3mm
Χώρα Προέλευσης
Mexico
Λεπτομέρειες Προϊόντος
Splices
Approvals
UL
Duraseal Heatshrinkable
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.
Approvals
UL Listed