Telemecanique Sensors XCSM Series Plunger Interlock Switch, 2NC/1NO, IP67, IP68, Metal Housing
Τεχνικό φυλλάδιο
Προδιαγραφές
Actuator Type
Plunger
Normal State Configuration
2NC/1NO
IP Rating
IP67, IP68
Housing Material
Metal
Connection Type
Cable
Series
XCSM
Length
70mm
Width
30mm
Depth
16mm
Mechanical Life
10000000Cycles
Better World Verification
Green Premium
Χώρα Προέλευσης
Indonesia
Λεπτομέρειες Προϊόντος
XCSM Series, Safety Limit Switches
The Schneider XCSM series of miniature/compact industrial limit switches are designed for monitoring access doors and/or guards on machines with low inertia and also on machines with high inertia, when used in conjunction with actuator operated guard switches. When used on their own they are always installed in positive mode, but if combined in pairs then one switch in positive mode and the other switch in negative mode. Available with a linear movement (plunger) or rotary movement (lever).
Approvals
UL, CSA.
Standards
CSA C22-2 No 14, EN 1088, EN/IEC 60204-1, EN/IEC 60947-5-1, UL 508.
Safety Limit Switch
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
Παρακαλούμε ελέγξτε ξανά αργότερα.
€ 116,80
Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 144,83
Μονάδας Με Φ.Π.Α
1
€ 116,80
Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 144,83
Μονάδας Με Φ.Π.Α
1
Τεχνικό φυλλάδιο
Προδιαγραφές
Actuator Type
Plunger
Normal State Configuration
2NC/1NO
IP Rating
IP67, IP68
Housing Material
Metal
Connection Type
Cable
Series
XCSM
Length
70mm
Width
30mm
Depth
16mm
Mechanical Life
10000000Cycles
Better World Verification
Green Premium
Χώρα Προέλευσης
Indonesia
Λεπτομέρειες Προϊόντος
XCSM Series, Safety Limit Switches
The Schneider XCSM series of miniature/compact industrial limit switches are designed for monitoring access doors and/or guards on machines with low inertia and also on machines with high inertia, when used in conjunction with actuator operated guard switches. When used on their own they are always installed in positive mode, but if combined in pairs then one switch in positive mode and the other switch in negative mode. Available with a linear movement (plunger) or rotary movement (lever).
Approvals
UL, CSA.
Standards
CSA C22-2 No 14, EN 1088, EN/IEC 60204-1, EN/IEC 60947-5-1, UL 508.