Timken 07097/07204 Taper 25 mm I.D Roller Bearing, 51.99 mm O.D
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
TimkenProduct Type
Roller Bearing
Inside Diameter
25 mm
Bore Type
Parallel
Roller Material
Steel
Cage Material
Steel
Cone Width
12.7mm
Static Load Rating
29.6kN
Outside Diameter
51.99 mm
End Type
Open
Bearing Dynamic Load Rating
29.1 kN
Standards/Approvals
No
Bearing Type
Taper
Χώρα Προέλευσης
United States
Λεπτομέρειες Προϊόντος
Tapered Roller Bearings - TS (Tapered Single) Imperial/Metric
These bearings are the most basic and most widely used type of tapered roller bearings. They consist of two main separable parts, the cone (inner ring) assembly and the cup (outer ring). They are typically mounted in opposing pairs on a shaft.
Timken
Ideate. Create. Collaborate
JOIN FOR FREE
No hidden fees!
- Download and use our DesignSpark software for your PCB and 3D Mechanical designs
- View and contribute website content and forums
- Download 3D Models, Schematics and Footprints from more than a million products
€ 74,08
€ 74,08 Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 91,86
€ 91,86 Μονάδας Με Φ.Π.Α
1
€ 74,08
€ 74,08 Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 91,86
€ 91,86 Μονάδας Με Φ.Π.Α
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
1
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
Ideate. Create. Collaborate
JOIN FOR FREE
No hidden fees!
- Download and use our DesignSpark software for your PCB and 3D Mechanical designs
- View and contribute website content and forums
- Download 3D Models, Schematics and Footprints from more than a million products
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
TimkenProduct Type
Roller Bearing
Inside Diameter
25 mm
Bore Type
Parallel
Roller Material
Steel
Cage Material
Steel
Cone Width
12.7mm
Static Load Rating
29.6kN
Outside Diameter
51.99 mm
End Type
Open
Bearing Dynamic Load Rating
29.1 kN
Standards/Approvals
No
Bearing Type
Taper
Χώρα Προέλευσης
United States
Λεπτομέρειες Προϊόντος
Tapered Roller Bearings - TS (Tapered Single) Imperial/Metric
These bearings are the most basic and most widely used type of tapered roller bearings. They consist of two main separable parts, the cone (inner ring) assembly and the cup (outer ring). They are typically mounted in opposing pairs on a shaft.
Timken
Ideate. Create. Collaborate
JOIN FOR FREE
No hidden fees!
- Download and use our DesignSpark software for your PCB and 3D Mechanical designs
- View and contribute website content and forums
- Download 3D Models, Schematics and Footprints from more than a million products