Torlon Black Polyamide-imide PAI Rod, 300mm x 25.4mm Diameter

Κωδικός Προϊόντος της RS: 257-7142Κατασκευαστής: Torlon
brand-logo

Τεχνικό φυλλάδιο

Προδιαγραφές

Brand

Torlon

Colour

Black

Length

300mm

Material

PAI

Form

Rod

Rod Diameter

25.4mm

Density

1.46g/cm³

Tensile Strength

164 MPa

Maximum Operating Temperature

+260°C

Flammability Rating

UL 94 V-0

Water Absorption

4.5%

Hardness

E 72 Rockwell

Elongation

7%

Χώρα Προέλευσης

United States

Λεπτομέρειες Προϊόντος

Torlon® 4301 - Bearing Grade

This grade of Torlon is modified with the addition of graphite and fluorocarbon for good wear resistance, low friction and high compressive strength. Applications include bearings, thrust washers, wear pads, and piston rings.

Torlon Rod

Provides better compressive strength and higher impact resistance than most high performance plastics. Extremely low coefficient of thermal expansion and high creep resistance.,Environmental: Torlon is unaffected by strong acids (pH<3), but ultra violet light and strong alkalis will cause dimensional change. Steam at 160° will cause decomposition.

Μπορεί να σας ενδιαφέρει
RS PRO Black Polyamide-imide PAI Rod, 300mm x 19.049mm Diameter
P.O.A.Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη

P.O.A.

Torlon Black Polyamide-imide PAI Rod, 300mm x 25.4mm Diameter

P.O.A.

Torlon Black Polyamide-imide PAI Rod, 300mm x 25.4mm Diameter
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη

Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη

Παρακαλούμε ελέγξτε ξανά αργότερα.

Μπορεί να σας ενδιαφέρει
RS PRO Black Polyamide-imide PAI Rod, 300mm x 19.049mm Diameter
P.O.A.Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α

Τεχνικό φυλλάδιο

Προδιαγραφές

Brand

Torlon

Colour

Black

Length

300mm

Material

PAI

Form

Rod

Rod Diameter

25.4mm

Density

1.46g/cm³

Tensile Strength

164 MPa

Maximum Operating Temperature

+260°C

Flammability Rating

UL 94 V-0

Water Absorption

4.5%

Hardness

E 72 Rockwell

Elongation

7%

Χώρα Προέλευσης

United States

Λεπτομέρειες Προϊόντος

Torlon® 4301 - Bearing Grade

This grade of Torlon is modified with the addition of graphite and fluorocarbon for good wear resistance, low friction and high compressive strength. Applications include bearings, thrust washers, wear pads, and piston rings.

Torlon Rod

Provides better compressive strength and higher impact resistance than most high performance plastics. Extremely low coefficient of thermal expansion and high creep resistance.,Environmental: Torlon is unaffected by strong acids (pH<3), but ultra violet light and strong alkalis will cause dimensional change. Steam at 160° will cause decomposition.

Μπορεί να σας ενδιαφέρει
RS PRO Black Polyamide-imide PAI Rod, 300mm x 19.049mm Diameter
P.O.A.Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α