Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
UltimakerProduct Type
Nozzle
For Use With
Olsson Block, Ultimaker 2+
Nozzle Material
Stainless Steel
Nozzle Size
0.5mm
Χώρα Προέλευσης
Netherlands
Λεπτομέρειες Προϊόντος
Ultimaker 2 Jet Nozzle - Stainless Steel
The Olsson block Stainless Steel Jet nozzle has a special tip angle and shoulder width, it also has a special internal geometry with an angle less steep down to the nozzle hole. A special treatment applied inside also makes them slip more. You can print 3°C to 5°C lower because of this treatment, and is also useful for oozing and drips.
With this special stainless steel nozzle, you can print faster, the plastic flows much more easier than in classic nozzles. You can also clean it efficiently with cold pulls (or atomic pulls). The geometry of the inside makes it easier to get rid of plastic so changing colours or filament type is done faster and safer
Ultimaker Accessories
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
Παρακαλούμε ελέγξτε ξανά αργότερα.
€ 84,29
Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 104,52
Μονάδας (Including VAT) Με Φ.Π.Α
1
€ 84,29
Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 104,52
Μονάδας (Including VAT) Με Φ.Π.Α
1
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
UltimakerProduct Type
Nozzle
For Use With
Olsson Block, Ultimaker 2+
Nozzle Material
Stainless Steel
Nozzle Size
0.5mm
Χώρα Προέλευσης
Netherlands
Λεπτομέρειες Προϊόντος
Ultimaker 2 Jet Nozzle - Stainless Steel
The Olsson block Stainless Steel Jet nozzle has a special tip angle and shoulder width, it also has a special internal geometry with an angle less steep down to the nozzle hole. A special treatment applied inside also makes them slip more. You can print 3°C to 5°C lower because of this treatment, and is also useful for oozing and drips.
With this special stainless steel nozzle, you can print faster, the plastic flows much more easier than in classic nozzles. You can also clean it efficiently with cold pulls (or atomic pulls). The geometry of the inside makes it easier to get rid of plastic so changing colours or filament type is done faster and safer