United Automation, Push Button Timer Space Heater Push Button Timer for use with IR Heaters
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
United AutomationAccessory Type
Push Button Timer
For Use With
IR Heaters
Model Number
Infresco-T 4kW
Χώρα Προέλευσης
United Kingdom
Λεπτομέρειες Προϊόντος
Infresco 4kW Push-Button Timer (1-30min) T-4kW
The infresco-T 4kW is part of a family of controllers that it is designed to provide energy saving when used with Quartz Infrared Halogen Lamps. The unit has a built in Push Button which switches on the power to the lamps for timed periods up to 40 minutes.
The microcontroller-based system incorporates zero-voltage switching and a soft-start function to eliminate the lamps’ initial high inrush current – potentially increasing lamp life by as much as 30%. When the Push Button is pressed the lamps are switched on for a time period of between 1 and 40 minutes. This time period can be set by adjusting a potentiometer on the circuit board. Once installed is relatively maintenance free.
Power Controller Accessories
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
Παρακαλούμε ελέγξτε ξανά αργότερα.
€ 177,20
Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 219,73
Μονάδας (Including VAT) Με Φ.Π.Α
1
€ 177,20
Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 219,73
Μονάδας (Including VAT) Με Φ.Π.Α
1
Αγοράστε μαζικά
| Quantity Ποσότητα | Τιμή μονάδας |
|---|---|
| 1 - 4 | € 177,20 |
| 5 - 9 | € 176,67 |
| 10 - 24 | € 171,98 |
| 25+ | € 160,28 |
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
United AutomationAccessory Type
Push Button Timer
For Use With
IR Heaters
Model Number
Infresco-T 4kW
Χώρα Προέλευσης
United Kingdom
Λεπτομέρειες Προϊόντος
Infresco 4kW Push-Button Timer (1-30min) T-4kW
The infresco-T 4kW is part of a family of controllers that it is designed to provide energy saving when used with Quartz Infrared Halogen Lamps. The unit has a built in Push Button which switches on the power to the lamps for timed periods up to 40 minutes.
The microcontroller-based system incorporates zero-voltage switching and a soft-start function to eliminate the lamps’ initial high inrush current – potentially increasing lamp life by as much as 30%. When the Push Button is pressed the lamps are switched on for a time period of between 1 and 40 minutes. This time period can be set by adjusting a potentiometer on the circuit board. Once installed is relatively maintenance free.