Weller T0051319099 Desoldering Iron, 80W Output
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
WellerDesoldering Tool Type
Desoldering Iron
Output Wattage
80W
Wattage
80W
Input Voltage
24V
Model Number
DSX 80
Tip Series
DX
For Use With
WDD81X Desoldering Station
Soldering Tip Temperature
450°C
Χώρα Προέλευσης
Mexico
Λεπτομέρειες Προϊόντος
DSX 80, 80 W, 24 V Desoldering Iron with Solder Extraction Tube.
From Weller this is the DSX80 Solder Extraction desoldering iron complete with an integrated extraction tube assisting in removing the solder from where you are working. The solder extraction tube will not affect the solder temperature at the solder tip therefore not reduce the required outcome of the solder work. The extraction tube is fitted over the solder tip plus is easy to remove and replace plus, the unit is fitted with a micro finger switch to control the suction and vacuum removal of solder. The suction switch is fitted on the handle of the tool. An integrated Kapton ribbon allows the safe changing of the solder extraction tube. The solder tips are easy to change as they are threadless and easily locked in place by a quick quarter turn. Compatible with WT soldering stations the desoldering iron heat to the required temperature, 50°C to 450°C within 50 seconds with 80 W of power and a voltage of 24 V.
Station Irons - Weller
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
Παρακαλούμε ελέγξτε ξανά αργότερα.
€ 394,07
Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 488,65
Μονάδας Με Φ.Π.Α
1
€ 394,07
Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 488,65
Μονάδας Με Φ.Π.Α
1
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
WellerDesoldering Tool Type
Desoldering Iron
Output Wattage
80W
Wattage
80W
Input Voltage
24V
Model Number
DSX 80
Tip Series
DX
For Use With
WDD81X Desoldering Station
Soldering Tip Temperature
450°C
Χώρα Προέλευσης
Mexico
Λεπτομέρειες Προϊόντος
DSX 80, 80 W, 24 V Desoldering Iron with Solder Extraction Tube.
From Weller this is the DSX80 Solder Extraction desoldering iron complete with an integrated extraction tube assisting in removing the solder from where you are working. The solder extraction tube will not affect the solder temperature at the solder tip therefore not reduce the required outcome of the solder work. The extraction tube is fitted over the solder tip plus is easy to remove and replace plus, the unit is fitted with a micro finger switch to control the suction and vacuum removal of solder. The suction switch is fitted on the handle of the tool. An integrated Kapton ribbon allows the safe changing of the solder extraction tube. The solder tips are easy to change as they are threadless and easily locked in place by a quick quarter turn. Compatible with WT soldering stations the desoldering iron heat to the required temperature, 50°C to 450°C within 50 seconds with 80 W of power and a voltage of 24 V.
Station Irons - Weller