Domnick Hunter Desiccant Compressed Air Dryer -40°C, 61-831-0350
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
Domnick HunterType
Desiccant
Dew Point
-40°C
Inlet Port Size
G 3/8
Manufacturer Series
61
Outlet Port Size
G 3/8
Typical Flow Rate
8.5m³/h
Electrical Supply
230V
Maximum Ambient Operating Temperature
+50°C
Minimum Ambient Operating Temperature
+1.5°C
Inlet Port Thread Standard
G
Ambient Operating Temperature Range
+1.5 → +50°C
Minimum Operating Inlet Pressure
4bar
Maximum Operating Inlet Pressure
12bar
Λεπτομέρειες Προϊόντος
Dry Air Systems
Compressed air is an essential power source that is widely used throughout industry. This safe, powerful and reliable utility can be the most important part of a production process. However compressed air will contain water, dirt, wear particles, bacteria and even degraded lubricating oil which all mix together to form an unwanted abrasive sludge. This sludge, often acidic, rapidly wears tools and pneumatic machinery, block valves and orifices causing high maintenance and costly leaks. It also corrodes piping systems and can bring a production process to an extremely expensive standstill. Only compressed air that is totally clean and dry will ensure maximum savings.
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
Παρακαλούμε ελέγξτε ξανά αργότερα.
P.O.A.
1
P.O.A.
1
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
Domnick HunterType
Desiccant
Dew Point
-40°C
Inlet Port Size
G 3/8
Manufacturer Series
61
Outlet Port Size
G 3/8
Typical Flow Rate
8.5m³/h
Electrical Supply
230V
Maximum Ambient Operating Temperature
+50°C
Minimum Ambient Operating Temperature
+1.5°C
Inlet Port Thread Standard
G
Ambient Operating Temperature Range
+1.5 → +50°C
Minimum Operating Inlet Pressure
4bar
Maximum Operating Inlet Pressure
12bar
Λεπτομέρειες Προϊόντος
Dry Air Systems
Compressed air is an essential power source that is widely used throughout industry. This safe, powerful and reliable utility can be the most important part of a production process. However compressed air will contain water, dirt, wear particles, bacteria and even degraded lubricating oil which all mix together to form an unwanted abrasive sludge. This sludge, often acidic, rapidly wears tools and pneumatic machinery, block valves and orifices causing high maintenance and costly leaks. It also corrodes piping systems and can bring a production process to an extremely expensive standstill. Only compressed air that is totally clean and dry will ensure maximum savings.