Gems Sensors RFS Series RotorFlow Electronic Flow Sensor for Liquid, 0.1 gal/min Min, 5 gal/min Max
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
Gems SensorsMedia Monitored
Liquid
Device Type
RotorFlow Electronic
Minimum Flow Rate
0.1 gal/min
Maximum Flow Rate
5 gal/min
Supply Voltage
24 V dc
Pipe Diameter Range
1/4 in
Connection Type
1/4 NPT Female
Maximum Pressure
6.9bar
Material
Polypropylene
Maximum Media Temperature
+21°C
Minimum Operating Temperature
-29°C
Series
RFS
Maximum Operating Temperature
+82°C
Current Rating
20 mA @ 24 V dc (No Load), 35 mA @ 24 V dc (Load)
Distrelec Product Id
13759549
Χώρα Προέλευσης
United States
Λεπτομέρειες Προϊόντος
RFS Type Electronic Flow Sensor
RotorFlow® Switches build an extra level of reliability and protection into your equipment. By principle of operation, the rotor cannot be deceived into indicating a positive flow situation when no flow actually exists. Once set to a desired actuation point, RotorFlow® switches to a “no-flow” condition when the rotor stops for any reason.
Altech Flow Sensors & Switches
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
Παρακαλούμε ελέγξτε ξανά αργότερα.
€ 379,10
Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 470,08
Μονάδας Με Φ.Π.Α
1
€ 379,10
Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 470,08
Μονάδας Με Φ.Π.Α
1
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
Gems SensorsMedia Monitored
Liquid
Device Type
RotorFlow Electronic
Minimum Flow Rate
0.1 gal/min
Maximum Flow Rate
5 gal/min
Supply Voltage
24 V dc
Pipe Diameter Range
1/4 in
Connection Type
1/4 NPT Female
Maximum Pressure
6.9bar
Material
Polypropylene
Maximum Media Temperature
+21°C
Minimum Operating Temperature
-29°C
Series
RFS
Maximum Operating Temperature
+82°C
Current Rating
20 mA @ 24 V dc (No Load), 35 mA @ 24 V dc (Load)
Distrelec Product Id
13759549
Χώρα Προέλευσης
United States
Λεπτομέρειες Προϊόντος
RFS Type Electronic Flow Sensor
RotorFlow® Switches build an extra level of reliability and protection into your equipment. By principle of operation, the rotor cannot be deceived into indicating a positive flow situation when no flow actually exists. Once set to a desired actuation point, RotorFlow® switches to a “no-flow” condition when the rotor stops for any reason.