RS PRO Blue Low-Density Polyethylene Solder Sleeve 29.3mm Length 2.3 → 4.5mm Cable Diameter
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
RS ProMinimum Cable Diameter
2.3mm
Maximum Cable Diameter
4.5mm
Sleeve Length
29.3mm
Material
Low-Density Polyethylene
Dielectric Strength
1kV
Minimum Operating Temperature
-55°C
Maximum Operating Temperature
+125°C
Quantity
1
Colour
Blue
Series
GAST
Shrink Temperature
>115°C
Standards Met
RoHS Compliant
Χώρα Προέλευσης
China
Λεπτομέρειες Προϊόντος
RS Solder Sleeves
Heat-Shrinkable sleeves that provide strain relief, insulation, moisture resistance and protection for terminations from environmental damage. The transparent heat-shrinkable sleeve contains a pre-measured fluxed solder band and coloured hot-melt glue at each end. A labour-saving alternative to conventional wire and cable termination methods such as hand soldering or crimping. The solder sleeves are available in a range of sizes to suit cable diameters from 0.5 mm² to 22 mm², or as an assorted kit.
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
Παρακαλούμε ελέγξτε ξανά αργότερα.
€ 72,87
1 Σακούλα των 100 (Exc. Vat)Χωρίς Φ.Π.Α
€ 90,36
1 Σακούλα των 100 Με Φ.Π.Α
1
€ 72,87
1 Σακούλα των 100 (Exc. Vat)Χωρίς Φ.Π.Α
€ 90,36
1 Σακούλα των 100 Με Φ.Π.Α
1
Αγοράστε μαζικά
| Quantity Ποσότητα | Τιμή μονάδας |
|---|---|
| 1 - 4 | € 72,87 |
| 5 - 49 | € 70,30 |
| 50+ | € 65,66 |
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
RS ProMinimum Cable Diameter
2.3mm
Maximum Cable Diameter
4.5mm
Sleeve Length
29.3mm
Material
Low-Density Polyethylene
Dielectric Strength
1kV
Minimum Operating Temperature
-55°C
Maximum Operating Temperature
+125°C
Quantity
1
Colour
Blue
Series
GAST
Shrink Temperature
>115°C
Standards Met
RoHS Compliant
Χώρα Προέλευσης
China
Λεπτομέρειες Προϊόντος
RS Solder Sleeves
Heat-Shrinkable sleeves that provide strain relief, insulation, moisture resistance and protection for terminations from environmental damage. The transparent heat-shrinkable sleeve contains a pre-measured fluxed solder band and coloured hot-melt glue at each end. A labour-saving alternative to conventional wire and cable termination methods such as hand soldering or crimping. The solder sleeves are available in a range of sizes to suit cable diameters from 0.5 mm² to 22 mm², or as an assorted kit.