TE Connectivity Transparent Polyolefin Solder Sleeve 45.5mm Length 6.5 → 15.1mm Cable Diameter
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
TE ConnectivityMinimum Cable Diameter
6.5mm
Maximum Cable Diameter
15.1mm
Sleeve Length
45.5mm
Material
Polyolefin
Minimum Operating Temperature
-55°C
Maximum Operating Temperature
+125°C
Quantity
3
Colour
Transparent
Series
B-155
Shrink Temperature
+85°C
Standards Met
ANSI J-STD-004, ANSI J-STD-006
Χώρα Προέλευσης
Mexico
Λεπτομέρειες Προϊόντος
Solder Sleeves®
A one piece soldering system for jointing signal cables and terminating cable screens. The system consists of heat shrinkable sleeve containing a predetermined amount of fluxed solder and a thermoplastic sealing insert at each end. The solder sleeve is placed over the joint to be made and the sleeve is heated by a heat gun. The sleeve shrinks, the sealing inserts melt and flow and the solder starts to melt. Heating is continued until the solder is seen to fully melt and flow. Temperature range -55°C to +125°C.
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
Παρακαλούμε ελέγξτε ξανά αργότερα.
€ 119,53
1 Πακέτο των 25 (Exc. Vat)Χωρίς Φ.Π.Α
€ 148,22
1 Πακέτο των 25 Με Φ.Π.Α
1
€ 119,53
1 Πακέτο των 25 (Exc. Vat)Χωρίς Φ.Π.Α
€ 148,22
1 Πακέτο των 25 Με Φ.Π.Α
1
Αγοράστε μαζικά
| Quantity Ποσότητα | Τιμή μονάδας |
|---|---|
| 1 - 14 | € 119,53 |
| 15 - 49 | € 115,32 |
| 50+ | € 110,88 |
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
TE ConnectivityMinimum Cable Diameter
6.5mm
Maximum Cable Diameter
15.1mm
Sleeve Length
45.5mm
Material
Polyolefin
Minimum Operating Temperature
-55°C
Maximum Operating Temperature
+125°C
Quantity
3
Colour
Transparent
Series
B-155
Shrink Temperature
+85°C
Standards Met
ANSI J-STD-004, ANSI J-STD-006
Χώρα Προέλευσης
Mexico
Λεπτομέρειες Προϊόντος
Solder Sleeves®
A one piece soldering system for jointing signal cables and terminating cable screens. The system consists of heat shrinkable sleeve containing a predetermined amount of fluxed solder and a thermoplastic sealing insert at each end. The solder sleeve is placed over the joint to be made and the sleeve is heated by a heat gun. The sleeve shrinks, the sealing inserts melt and flow and the solder starts to melt. Heating is continued until the solder is seen to fully melt and flow. Temperature range -55°C to +125°C.