Telemecanique Sensors Pressure Switch, 0bar Min, 6bar Max, Analogue Output
Τεχνικό φυλλάδιο
Προδιαγραφές
Minimum Pressure Reading
0bar
Maximum Pressure Reading
6bar
Accuracy
±0.3 %
Output Type
Analogue
Media Measured
Air, Fresh Water
Analogue Output
4 → 20 mA
Electrical Connection
M12 3-Pin Connector
Response Time
2 ms
Maximum Current
20 mA
Supply Voltage
24 V dc
Housing Material
Stainless Steel
Maximum Operating Temperature
+80°C
IP Rating
IP65
Minimum Operating Temperature
0°C
Mounting Type
Thread Mount
Χώρα Προέλευσης
Switzerland
Λεπτομέρειες Προϊόντος
OsiSense XMLK Pressure Sensors
Schneider Electric XMLK pressure transmitters are feature a ceramic pressure measuring cell and are available with various types of electrical connector and fluid connections. Deformation, caused by pressure, changes the resistance of the resistors of a Wheatstone bridge silk-screened on the ceramic. The change in resistance is then processed by the integrated electronics to provide an analogue output signal.
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
Παρακαλούμε ελέγξτε ξανά αργότερα.
€ 213,87
Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 265,20
Μονάδας Με Φ.Π.Α
1
€ 213,87
Μονάδας (Exc. Vat)Χωρίς Φ.Π.Α
€ 265,20
Μονάδας Με Φ.Π.Α
1
Τεχνικό φυλλάδιο
Προδιαγραφές
Minimum Pressure Reading
0bar
Maximum Pressure Reading
6bar
Accuracy
±0.3 %
Output Type
Analogue
Media Measured
Air, Fresh Water
Analogue Output
4 → 20 mA
Electrical Connection
M12 3-Pin Connector
Response Time
2 ms
Maximum Current
20 mA
Supply Voltage
24 V dc
Housing Material
Stainless Steel
Maximum Operating Temperature
+80°C
IP Rating
IP65
Minimum Operating Temperature
0°C
Mounting Type
Thread Mount
Χώρα Προέλευσης
Switzerland
Λεπτομέρειες Προϊόντος
OsiSense XMLK Pressure Sensors
Schneider Electric XMLK pressure transmitters are feature a ceramic pressure measuring cell and are available with various types of electrical connector and fluid connections. Deformation, caused by pressure, changes the resistance of the resistors of a Wheatstone bridge silk-screened on the ceramic. The change in resistance is then processed by the integrated electronics to provide an analogue output signal.