Texas Instruments TUSB4041IPAP, USB Hub, 4-Channel, 480Mbit/s, USB 2.0, 64-Pin HTQFP
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
Texas InstrumentsNumber of Transceivers
4
Data Rate
480Mbit/s
Protocols Supported
USB 2.0
Power Supply Type
Dual
ESD protection
Yes
Typical Dual Supply Voltage
1.1 V, 3.3 V
Mounting Type
Surface Mount
Package Type
HTQFP
Pin Count
64
Dimensions
10.2 x 10.2 x 1.05mm
Height
1.05mm
Length
10.2mm
Maximum Operating Temperature
-40 → +85 °C
Width
10.2mm
Minimum Operating Temperature
-40 → +85 °C
Λεπτομέρειες Προϊόντος
USB Hub Controllers, Texas Instruments
Texas Instruments USB hub Controller devices provide multiple downstream ports in compliance with the USB 2.0 specification. As they are implemented as digital state machines rather than microcontrollers, no software programming is required. Fully-compliant USB transceivers are integrated into the ASIC for all upstream and downstream ports. Both full-speed and low-speed downstream ports are supported by automatically setting the slew rate according to the speed of the device attached to the ports.
USB (Universal Serial Bus), Texas Instruments
Ημερομηνία αποθέματος προσωρινά μη διαθέσιμη
Παρακαλούμε ελέγξτε ξανά αργότερα.
P.O.A.
1
P.O.A.
1
Τεχνικό φυλλάδιο
Προδιαγραφές
Brand
Texas InstrumentsNumber of Transceivers
4
Data Rate
480Mbit/s
Protocols Supported
USB 2.0
Power Supply Type
Dual
ESD protection
Yes
Typical Dual Supply Voltage
1.1 V, 3.3 V
Mounting Type
Surface Mount
Package Type
HTQFP
Pin Count
64
Dimensions
10.2 x 10.2 x 1.05mm
Height
1.05mm
Length
10.2mm
Maximum Operating Temperature
-40 → +85 °C
Width
10.2mm
Minimum Operating Temperature
-40 → +85 °C
Λεπτομέρειες Προϊόντος
USB Hub Controllers, Texas Instruments
Texas Instruments USB hub Controller devices provide multiple downstream ports in compliance with the USB 2.0 specification. As they are implemented as digital state machines rather than microcontrollers, no software programming is required. Fully-compliant USB transceivers are integrated into the ASIC for all upstream and downstream ports. Both full-speed and low-speed downstream ports are supported by automatically setting the slew rate according to the speed of the device attached to the ports.